Primer 580-WB-LV
Aussie Bond 580-WB is a water-based, polymer-modified primer designed to enhance the adhesion of AVM waterproofing membranes to a wide range of substrates. This low-VOC, eco-friendly primer creates a tacky surface that significantly improves bonding strength between substrates and self-adhered sheet membranes. Its fast-drying, water-based formulation allows for safe and efficient installation in both indoor and outdoor environments.
Where to Use
Aussie Bond 580-WB is compatible with and recommended for
- AVM System 580-AL
- AVM System 580-PL
Key Features
- Water-Based & Low VOC — Safe for interior use and compliant with strict environmental regulations.
- Improves Adhesion — Increases the bond strength between substrate and waterproofing membrane.
- Fast Drying Time — Allows membrane application shortly after primer dries, expediting installation.
- Cost-Effective System — Provides long-term membrane performance with a minimal upfront investment.
Material
Liquid Product (Water-Based Primer)
System
Used as a component in below-grade and above-grade waterproofing systems
Documents
- Details
- 0580-AL_580-PL – View-ALL (PDF)
- 0580-AL_0580-PL-0001 – Backfilled Wall Vertical Overview (DWG) (PDF)
- 0580-AL_0580-PL-0002 – Backfilled Wall on Footing With Vapor Barrier (DWG) (PDF)
- 0580-AL_0580-PL-0004 – Transition to Vapor Barrier, Backfilled Wall Flush Footing (DWG) (PDF)
- 0580-AL_0580-PL-0006 – Transition to Aussie Skin Underslab, Flush Footing (DWG) (PDF)
- 0580-AL_0580-PL-0102 – Elevator Pit Transition to Aussie Skin, Extended Footing (DWG) (PDF)
- 0580-AL_0580-PL-0104 – Elevator Pit Transition to Aussie Skin, Flush Footing (DWG) (PDF)
- 0580-AL_0580-PL-1102 – O1 Deck to Wall Transition, ISO (DWG) (PDF)
- 0580-AL_0580-PL-1104 – O2 Deck to Wall Transition (DWG) (PDF)
- 0580-AL_0580-PL-1106 – Split Slab Assembly (DWG) (PDF)
- 0580-AL_0580-PL-1108 – Split Slab Edge Termination (DWG) (PDF)
- 0580-AL_0580-PL-1200 – Control Joint (DWG) (PDF)
- 0580-AL_0580-PL-1504 – Deck Drain Flush (DWG) (PDF)
- 0580-AL_0580-PL-1506 – Deck Drain With Inspection Cover (DWG) (PDF)
- 0580-AL_0580-PL-1508 – Split Slab Two-Stage Drain (DWG) (PDF)
- 0580-AL_0580-PL-6002 – Planter Terminations (DWG) (PDF)
- 0580-AL_0580-PL-6004 – Sidewalk Termination (DWG) (PDF)
- 0580-AL_0580-PL-6006 – Backfilled Wall Terminations (DWG) (PDF)
- 0580-AL_0580-PL-6502 – Typical Wall Penetration (DWG) (PDF)
- 0580-AL_0580-PL-6504 – Cored Wall Penetration (DWG) (PDF)
- 0580-AL_0580-PL-6505 – Sleeved Wall Penetration (DWG) (PDF)
- 0580-AL_0580-PL-6506 – Penetration Target Patch Sheet (DWG) (PDF)
- 0580-AL_0580-PL-6510 – Multiple Pipe Penetration (DWG) (PDF)
- 0580-AL_0580-PL-6512 – Deck Pipe Penetration (DWG) (PDF)
- 0580-AL_0580-PL-7004 – Lapping Detail (DWG) (PDF)
- 0580-AL_0580-PL-7006 – Outside Corner (DWG) (PDF)
- 0580-AL_0580-PL-7008 – Inside Corner (DWG) (PDF)
Methane
- 0580-AL-Methane – View-ALL (PDF)
- 0580-AL-0002 – Backfilled Wall on Footing With Vapor Barrier (DWG) (PDF)
- 0580-AL-0004 – Transition to Vapor Barrier, Backfilled Wall Flush Footing (DWG) (PDF)
- 0580-AL-0101-Methane – End Outlet Connector (DWG) (PDF)
- 0580-AL-0110 – Methane DV Vent (DWG) (PDF)
- 0580-AL-4001-Methane – Under Slab Assembly Over Compacted Earth (DWG) (PDF)
- 0580-AL-4011-Methane – Under Slab Assembly Over Severely Contaminated Earth (DWG) (PDF)
- 0580-AL-4016-Methane – Typical Horizontal Membrane Termination (DWG) (PDF)
- 0580-AL-4018-Methane – Typical Vertical Membrane Termination (DWG) (PDF)
- 0580-AL-4020-Methane – Sub-Slab Vent System (DWG) (PDF)
- 0580-AL-6710-Methane – Multiple Pipe Bank Pitch Pan (DWG) (PDF)
- 0580-AL-6712-Methane – Vertical Pipe Penetration (DWG) (PDF)
- 0580-AL-6714-Methane – Typical Floor Drain (DWG) (PDF)
- 0580-AL-7002-Methane – Lapping Detail (DWG) (PDF)
Technical Data Sheet
Safety Data Sheet