Aussie Shield 300 PLM
Aussie Shield™ 300-PLM is one-component Silyl Terminated Polymer (STP) Membrane intended for use as a sprayable/rollable permeable liquid applied Air Barrier Membrane. (In some applications, it may also be used as a Permeable Liquid Applied Flashing) Aussie Shield™ 300-PLM is solvent free, isocyanate free, and bonds to most common building materials without priming. It forms a seamless flexible barrier that prevents penetration of unwanted water and air through the building envelope while being breathable to allow damp surfaces to dry. It may be exposed to UV light and weather for up to 12 months.
Where to Use
- Sheathing materials such as DensGlass, plywood, CMU, and concrete
- Around windows, penetrations, and other irregular surfaces when used as a permeable liquid flashing
- Exterior walls requiring a breathable air and water barrier
Key Features
- Breathable Membrane — Allows damp surfaces to dry while preventing water and air intrusion.
- Excellent Adhesion — Bonds to most common building materials without the need for priming.
- UV and Weather Resistant — Can be exposed to UV light and weather for up to 12 months.
- Cost-Effective System — Provides long-term waterproofing protection at a competitive price.
Material
- Liquid product (sprayable/rollable permeable liquid-applied membrane)
System
System 300 Documents
- Approvals
- Details
0300– View-All (PDF)
Over Concrete Substrates
- 0300-PLM-1100.1 — Typical Window Flashing Pre-Treatment PLF (DWG) (PDF)
- 0300-PLM-1100.2 — Typical Window Flashing Full Assembly (DWG) (PDF)
- 0300-PLM-1100.3 — Typical Window Flashing Post Treatment (DWG) (PDF)
- 0300-PLM-1103 — Window Flange Flashing Full Assembly (DWG) (PDF)
- 0300-PLM-1110.1 — Sheathing Joint Detailing (DWG) (PDF)
- 0300-PLM-1110.2 — Sheathing Joint Detailing Post Treatment (DWG) (PDF)
- 0300-PLM-1115.1 — Inside & Outside Corners (DWG) (PDF)
- 0300-PLM-1115.2 — Inside & Outside Corners Post Treatment (DWG) (PDF)
- 0300-PLM-1120 — Typical Penetration (DWG) (PDF)
- 0300-PLM-1125 — Transition to Below Grade Waterproofing Flush Foundation (DWG) (PDF)
- 0300-PLM-1126 — Transition to AVM 620 Traffic Coating with L Metal (DWG) (PDF)
- 0300-PLM-1127 — Transition to AVM 620 Traffic Coating (DWG) (PDF)
- 0300-PLM-1130.1 — Window Head (DWG) (PDF)
- 0300-PLM-1130.2 — Window Head w Metal Cap (DWG) (PDF)
- 0300-PLM-1135.1 — Pan Flashing Pre-Treatment (DWG) (PDF)
- 0300-PLM-1135.2 — Pan Flashing Post-Treatment (DWG) (PDF)
- 0300-PLM-1400 — CMU or Concrete Arched Window Rough Opening (DWG) (PDF)
- 0300-PLM-1401 — Rough Opening on Sheathing Wall (DWG) (PDF)
- 0300-PLM-1402 — Rough Opening with 300 PLF or 300 PLM Building Wrap (DWG) (PDF)
- 0300-PLM-1403 — Window Head Detail Thru-Wall Flashing & Term Bar (DWG) (PDF)
- 0300-PLM-1404 — Window Head Flashing (DWG) (PDF)
- 0300-PLM-1405 — Typical Expansion Joint (DWG) (PDF)
- 0300-PLM-1406 — Scupper Detail (DWG) (PDF)
- 0300-PLM-1407 — Expansion Joint with Foil Face (DWG) (PDF)
- 0300-PLM-1408 — Typical Movement Joint (DWG) (PDF)
- 0300-PLM-1500 — Roof to Wall System (DWG) (PDF)
- 0300-PLM-1501 — Transition to Roofing at Parapet (DWG) (PDF)
- 0300-PLM-1502 — Transition to Roofing without Parapet Wall (DWG) (PDF)
- 0300-PLM-1600 — Trespa Cladding Over Aussie Shield (DWG) (PDF)
- Safety Data Sheets
- Specifications
- Technical Bulletins
Tech Bulletin 300 (Aussie Shield 300 Surface & Air Temperature)
Tech Bulletin 301 (Direct Applied Stucco to Aussie Shield 300-PLM)
Tech Bulletin 302 (Moisture Vapor Permeable Product in Warm, Humid Locations)
Tech Bulletin 303 (Aussie Shield PLM on Concrete Masonry Units)
- Technical Data Sheets
- Warranties
Installation Instructions
Submittal Packet
Optional Components
Aussie Seal M
Gallery
